Filter
Top Products
CDM-600 Satellite Modem Revision 7
Front Panel Operation MN/CDM600.IOM
6–5
6.2 Opening Screen
This screen is displayed whenever power is first applied to the unit:
For units manufacured after February 2005 with the extended IF bandwidth feature:
Press any key to go to the Main Menu screen. (Note: a REF WARMING message may be
seen at this point - see Section 6.3.1.8.)
6.3 Main Menu
The following choices are presented:
CONFIGURATION
Permits the user to fully configure the modem.
TEST
Permits the user to configure the modem into one of several Test
modes.
INFORMATION
Permits the user to view information on the modem, without
having to go into the Configuration screens.
MONITOR
Permits the user to monitor the current status of the modem and
view the log of stored events for the modem.
STORE/LOAD
Permits the user to store and retrieve up to 10 different modem
configurations.
UTILITY
Permits the user to perform miscellaneous functions, such as
setting the Real-Time Clock, adjusting the display brightness,
etc.
ODU
(Outdoor Unit)
Permits the user to monitor and control a Comtech EF Data RF
Transceiver, if connected.
FAST
(Fully Accessible System
Topology)
Permits the user to configure different options, for extended data
rates, interfaces, etc. Contact the factory for details.
IMPORTANT
The actual choices displayed in the sub-menus may vary according
to which FAST options have been enabled. Where a FAST option
affects a menu, this is shown in the descriptive text.
COMTECH CDM-600 OPEN NETWORK MODEM
TURBO: TPC/LDPC S/W VER 2.0.1
SELECT: CONFIGURATION TEST INFORMATIO
N
MONITOR STORE/LOAD UTILITY ODU FAST
COMTECH CDM-600(E) OPEN NETWORK MODEM
TURBO: TPC/LDPC S/W VER 2.0.1