Filter
Top Products
CDM-600 Satellite Modem Revision 7
ODU Operation MN/CDM600.IOM
D–7
D.2.11 (ODU,ENABLE,1:1,CSAT#1,CONFIG) LNA
(ODU,ENABLE,1:1,CSAT#2,CONFIG) LNA
(ODU,ENABLE,STANDALONE CSAT,CONFIG) LNA
LNA: STATE=OFF CALIBRATE-LNA-CURRENT=NO
CURRENT-WINDOW=48% FAULT-LOGIC=SUMMARY
Use the [←] or [→] keys to select the parameter to edit. Use the [↑] or [↓] keys to edit
the parameter, then press ENTER to implement, or CLEAR.
LNA STATE
either OFF or ON - controls whether or not the CSAT will provide LNA
Power via the Receive RF Cable.
CALIBRATE-
LNA-CURRENT
Selecting YES and pressing ENTER calibrates the LNA current for use with
the Current-Window function. (Default is NO)
CURRENT
WINDOW:
Values will scroll between 20% and 50% to define the allowable LNA
Current change before declaring a fault. Selecting 99% disables the Current
Window function.
FAULT-LOGIC:
either SUMMARY or NO_SUMMary. This controls whether or not a LNA
Current-Window fault will activate the Summary Fault Relay. This allows the
user to select whether or not to switch the Online/Offline CSAT in the event
of a LNA Current-Window fault.