Filter
Top Products
CDM-600 Satellite Modem Revision 7
Remote Control MN/CDM600.IOM
16–32
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response
to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Rx BER N/A 5 bytes Query only.
Units returns the value of the estimated corrected BER
in the form a.bx10
-3
. First three bytes are the value. Last
two bytes are the exponent. Returns 99999 if the
demodulator is unlocked or BER data is unavailable.
Example: BER=4.8E3 (which is BER=4.8 x 10
-3
)
N/A BER? BER=x
(see description
of arguments)
Redundancy
State
N/A 1 byte, 0 or 1 Query only.
Unit returns the redundancy state of the unit, where
0=Offline
1=Online
Example: RED=1 (which is Online)
N/A RED? RED=x
(see description
of arguments)
Local/Remote
Status
LRS= 1 byte, 0 or 1 Command or Query.
Used set the user’s Local/Remote status, where:
0=Local
1=Remote
Example: LRS=1 (which is Remote)
LRS=
LRS?
LRS*
LRS#
LRS? LRS=x
Software
Revision
N/A 5 bytes Query only.
Unit returns the value of the internal software revision
installed in the unit, in the form of x.x.x
Example: SWR=1.0.3
N/A SWR? SWR=x.x.x
(see description
of arguments)
Serial
Number
SNO= 9 bytes Query only.
Used to set or Query the units 9 digit serial number. Unit
returns its S/N in the form xxxxxxxxx.
Example: SNO=176500143
N/A SNO? SNO=xxxxxxxxx
(see description of
arguments)