CDM-600 Satellite Modem Revision 7
Front Panel Operation MN/CDM600.IOM
6–35
INFO: REMOTE
This screen shows if the unit is in Local or Remote mode, provides the details of the
electrical interface type selected, the unit’s address and the baud rate selected. Pressing
ENTER takes the user back to the previous menu.
INFO: ALARMS MASK
This screen shows only the alarm(s) that are currently masked:
• TX-AIS
• RX-AIS
• BUF-SLIP
• AGC
• EBNO
• SAT
• TERR
If an alarm is not masked, a blank is displayed in the relevant screen position.
INFO: MISC
This screen shows the following:
• Test Mode
• 1:1 Link Status
• Redundancy Status
REMOTE-CONTROL= LOCAL ADDRESS= 0000
INTERFACE = RS-232 9600 BAUD N81
ALARMS MASKED: TX-AIS RX-AIS BUF-SLIP
AGC EBNO SAT
MISCELLANEOUS: NORMAL
1:1 SWITCH = NOT CONNECTED ONLINE