CDM-600 Satellite Modem Revision 7
Connector Pinouts MN/CDM600.IOM
5–7
5.11 AC Power Connector
A standard, detachable, non-locking, 3-prong power cord (IEC plug) supplies the
Alternating Current (AC) power to the modem. Note the following:
AC Power Specifications
Input Power 40W maximum, 30W typical
Input Voltage 100 - 240 volts AC, +6%/-10% - autosensing
(total absolute max. range is 90 - 254 volts AC)
Connector Type IEC
Fuse Protection 1.25A Slow-blow (115 volt AC operation)
0.75A Slow-blow (230 volt AC operation)
Line and neutral fusing
20 mm type fuses
5.12 Ground Connector
A #10-32 stud on the rear panel of the modem is used for connecting a common chassis
ground among equipment.
Note: The AC power connector provides the safety ground.