Filter
Top Products
CDM-600 Satellite Modem Revision 7
Remote Control MN/CDM600.IOM
16–33
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response
to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
33399999999
999Software
Checksum
N/A 29 bytes Query only.
Unit returns the checksum values for the Boot, Main, and
FPGA sections of firmware:
Boot:XXXX Main:YYYY FPGA:ZZZZ
where:
XXXX=the integer sum checksum for the Boot Block.
YYYY=the integer sum checksum for the Main Block.
ZZZZ=the integer sum checksum for the FPGA Block.
Example: FCS=Boot:5AB2 Main:81FE FPGA:C5AO
(Takes a few seconds to respond.)
N/A FCS? FCS=Boot:XXXX
Main=YYYY
FPGA=ZZZZ
(see description of
arguments)
Temperature N/A 3 bytes Query only.
Unit returns the value of the internal temperature sensor,
in the form of xxx (degrees C).
Example: TMP=+26
N/A TMP? TMP=xxx
(see description of
arguments)