Filter
Top Products
CDM-600 Satellite Modem Revision 7
Remote Control MN/CDM600.IOM
16–20
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response
to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Rx Audio
Volume
Control
RVL= 4 bytes Command or Query. (Audio/IDR Parameters)
Rx Audio Volume control, in the form aabb, where:
aa=Rx 1 volume control in dB, values defined below.
bb=Rx 2 volume control in dB, values defined below.
Valid values: -6, -4, -2, +0, +2, +4, +6, +8
Example: RVL= -2+4 (sets Rx 1 to -2 dB and Rx 2 to +4
dB)
RVL=
RVL?
RVL*
RVL#
RVL? RVL=aabb
(see description of
arguments)
Receive
Terrestrial
Alarm Enable
RTE= 1 byte, 0 or 1 Command or Query. (INSERT mode parameter)
Receive Terrestrial Alarm Enable conditions, where:
0=Disables the alarm
1=Enables the alarm.
Example: RTE=0 (selects Disable the alarm).
RTE=
RTE?
RTE*
RTE#
RTE? RTE=x
(see description of
arguments)
Insert Type ITY= 1 byte, value
of 0 thru 3
Command or Query. (INSERT/D&I++ mode parameter)
Insert Type, where:
0=T1–D4
1=T1–ESF
2=E1–CCS
3=E1–CAS
ITY=
ITY?
ITY*
ITY#
ITY? ITY=x
Rx Ternary
Code
RTC=
1 byte, value
of 0 thru 3
Command or Query. (G.703 Parameter)
Rx Ternary Code, where:
0=AMI
1=B8ZS
2=B6ZS
3=HDB3
Example: RTC=1 (selects B8ZS)
RTC=
RTC?
RTC*
RTC#
RTC?
RTC=x
(see description of
arguments)
Receive
Backward
Alarms
Enable
RBA= 4 bytes, each
a value of 0
or 1
Command or Query. (IDR Parameter)
Enable Receive backward alarm enable:
0=Disable
1=External trigger Enable
Example: RBA=0101
RBA=
RBA?
RBA*
RBA#
RBA? RBA=xxxx