Filter
Top Products
CDM-600 Satellite Modem Revision 7
Remote Control MN/CDM600.IOM
16–37
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response
to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Insert
Timeslot
ITS= 3 bytes Command or query.
(Note different format between command and query.)
Command format: ITS=xxy
Where xx = Channel 01 through 24
y = timeslot: 0-9, A=10, B=11, C=12, D=13,…V=31
ITS=
ITS?
ITS*
ITS#
ITS? ITS=yyyyyyyyyyyyyy
yyyyyyyyyy
indicating all 24
Insert timeslots
values associated
with the 24 Rx
Satellite channels.
Bulk Status
Query
N/A 28 bytes Query only.
The response has the format:
abcccc,ddddd,eefffffggggghhh,
where:
a is as LRS? response
b is as RED? response
cccc is as EBN? response
ddddd is as BER? response
eeeee is as BFS? response
fffff is as RFO? response
ggggg is as RSL? response
hhh is as TMP? response
This command is intended to reduce
the need for
excessively frequent queries to a modem, and will be
useful for a unit in a redundancy system, where the
redundancy system has monitoring of its own occurring.
The latter 6 parameters are only updated once per
second.
N/A BSQ? BSQ=abcccc,ddddd,
eefffffggggghhh