Filter
Top Products
3URGXFW5HIHUHQFH*XLGH 6-27
*RRG5HDG%HHS9ROXPH
Selects the beeper volume upon a good read beep. There are five selectable
volumes, with each volume increment adding approximately five decibels
to the previous level:
•0 = Lowest Volume
•1 = Medium-Low Volume
•2 = Medium Volume
•3 = Medium-High Volume
• 4 =Highest Volume
To set the Good Read Beep Volume:
1. Scan the SWITCH bar code.
2. Scan your selected volume bar code from this or the following
pages. You’ll need to cover any unused bar codes on this and the
facing page to ensure that the scanner reads only the bar code you
intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
GOOD READ BEEP VOLUME = LOWEST