Filter
Top Products
3URGXFW5HIHUHQFH*XLGH 6-201
&RGH7UDQVPLW)XQFWLRQ&KDUDFWHUV
Enables/disables transmission of Code 128 function characters 1, 2, 3,
and 4.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You’ll need to
cover any unused bar codes on this and the facing page to ensure
that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
CODE 128 TRANSMIT FUNCTION CHARACTERS = DISABLE
CODE 128 TRANSMIT FUNCTION CHARACTERS = ENABLE
NOTE
Disabled is the recommended setting for all interfaces.