Filter
Top Products
6-194 0DJHOODQ 6FDQQHU
&RGH)L[HG/HQJWK
This feature specifies Code 39 second fixed length.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code, SET CODE 39 FIXED LENGTH 2 below.
You’ll need to cover any unused bar codes on this and the facing
page to ensure that the scanner reads only the bar code you intend
to scan.
3. Scan the appropriate digits from the keypad in Appendix C that
represent the desired fixed label length. The selectable range for
this option is 00, no second fixed length, or 01 to 50. Pad all sin-
gle digit numbers with a leading zero to yield a two-digit entry
(00-50).
4. Complete the programming sequence by scanning the SWITCH
bar code.
SET CODE 39 FIXED LENGTH 2
NOTE
This applies when Code 39 Length Control is set to fixed-length
decoding.
If Fixed Length 2 is set to 00, then Fixed Length 1 will apply