Filter
Top Products
3URGXFW5HIHUHQFH*XLGH 2-17
• Lift out the accessory box containing the AC/DC Power Supply,
optional Remote Scale Display and cable (if present), and the
Quick Reference Guide.
• Remove the Quick Reference Guide and familiarize yourself with
the unit’s controls and features. Leave the guide at the checkstand
when the installation is complete.
• Remove the protective packing and carefully lift the unit from the
carton. Be sure to save the box and all packing material. In the
event of failure, the unit must be returned to the factory in its
original packaging
.
• Carefully lift off the All Weighs™ Platter as shown in
Figure 2-17 and remove the protective foam pieces securing the
weigh mechanism. Set the platter back in place.
Figure 2-9. Remove Protective Vinyl
• Proceed to the Operational Verification instructions below.
NOTE
For added protection during shipment, the All Weighs™ Platter is covered
with a tight-fitting layer of vinyl as shown in Figure 2-9. This vinyl layer
MUST BE REMOVED before placing the unit into service.
Protective vinyl
MUST be removed
from the
platter
before use.