Registering Folders
91
5
Registering Folders
By registering a shared folder, you
can send scan files to it directly.
There are three types of protocol you
can use:
•SMB
For sending files to shared Win-
dows folders
•FTP
Use when sending files to an FTP
server.
•NCP
Use when sending files to an Net-
Ware server.
Note
❒ For details about protocols, server
names, and folder levels, consult
your network administrator.
❒ You can prevent unauthorized us-
ers from accessing folders from the
machine. See p.107 “Registering a
Protection Code”.
❒ You can only select either SMB,
FTP, or NCP. If you change proto-
col after finishing your settings, all
previous entries are cleared.
Reference
For details about network settings,
see “Setting Up the Machine on a
Network”, Network Guide.
For details about Scan to Folder,
see "Sending Scan Files by Scan to
Folder" Scanner Reference.
Using SMB to Connect
Note
❒ To register a folder in an FTP serv-
er, see p.95 “Using FTP to Con-
nect”.
❒ To register a folder in an NetWare
server, see p.98 “Using NCP to
Connect”.
To register an SMB folder
A Press the {User Tools/Counter} key.
B Press [System Settings].
C
Press
[
Administrator Tools
]
, and then
press [TNext].
D Press [Address Book Management].
E Select the name whose folder you
want to register.
Press the name key, or enter the
registered number using the
number keys.
ZFFH220E