Ricoh 2025 All in One Printer User Manual


 
Settings You Can Change with User Tools
57
4
The paper sizes you can set for tray 2 are as follows:
•A3L, B4 JISL, A4K, A4L, B5 JISK, B5 JISL, A5L, B6 JISL, A6L,
PostcardL, 8KL, 16KK, 16KL
11"×17"L, 8
1
/
2
"×14"L, 8
1
/
2
"×11"K, 8
1
/
2
"×11"L, 5
1
/
2
"×8
1
/
2
"L,
7
1
/
4
"×10
1
/
2
"L, 7
1
/
4
"×10
1
/
2
"K, 8"×13"L, 8
1
/
2
"×13"L, 8
1
/
4
"×13"L,
11"×14"L, 11"×15"L, 10"×14"L, 10"×15"L , 8
1
/
4
"×14"L, 8"×10
1
/
2
"L,
8"×10
1
/
2
"K, 8"×10"L, 8"×10"K, C5L, C6L, DL EnvL, 4
1
/
8
"×9
1
/
2
"L,
3
7
/
8
"×7
1
/
2
"L, custom size (100-297 mm (3.97"-11.69") wide x 148-432
mm (5.83"-17.00") long)
Reference
p.132 “Changing the Paper Size”
Important
If the specified paper size differs from the actual size of the paper loaded
in the paper tray, a misfeed might occur because the correct paper size was
not detected.
Note
The paper guide for the optional LCT is fixed for A4K, 8
1
/
2
"×11"K size
paper. Contact your service representative if you need to change the paper
size.
If the paper size set for the selector in paper tray is different to the paper
size for this setting, the paper size of the dial has priority.
If you load paper of a size not indicated on the paper size selector in the
paper tray, set the dial to " ".
Default:
•Tray 1: A4K, 8
1
/
2
" × 11"K
•Tray 2: A3L, 11" × 17"L
•Tray 3: A4L, 8
1
/
2
" × 11"L
•Tray 4: A4L, 8
1
/
2
" × 14"L
Reference
p.132 “Changing the Paper Size”
Paper Type: Bypass tray
Sets the display so you can see what type of paper is loaded in the bypass tray.
The paper types you can set for the bypass tray are as follows:
No Display, Recycled Paper, Special Paper, Colour Paper, Letterhead,
Preprinted Paper, Label Paper, Bond Paper, Thick Paper, OHP, Thin Pa-
per, Cardstock
Note
Default: No Display