Guide to Components
19
1
External Options
1. 500-sheet finisher
Sorts, stacks and staples copies.
Note
❒ You cannot install two finishers si-
multaneously.
2. Bridge unit
Relays copies to the finisher.
3. Exposure glass cover
Lower this cover over originals.
4. ADF
Load a stack of originals. They will feed
in automatically.
5. Internal tray 2 (1 bin tray)
If you select this as the output tray, copies
are delivered face down.
6. 1000-sheet finisher
Sorts, stacks and staples copies.
*1
: Finisher upper tray
*2
: Finisher shift tray
Note
❒ You cannot install two finishers si-
multaneously.
7. Shift sort tray
Sorts and stacks copies.
8. Paper tray unit
Consists of two paper trays.
9. Large Capacity Tray (LCT)
Holds up to 2000 sheets of paper.
10. Bypass tray
Use when copying onto OHP transparen-
cies, label paper (adhesive labels), trans-
lucent paper, postcards, envelopes and
custom size paper. See “Copying from
the Bypass tray”, Copy Reference.
11. Duplex unit
Use to make two-sided copies.
12. Inter change unit
Required when installing the internal
tray 2 (1 bin tray) and duplex unit.
AHR008S