Filter
Top Products
Simplifying the Operation
132
7
Using a Program
Note
❒ Using the program causes the pre-
vious settings to be cleared.
❒ If you have no programmed desti-
nations or scan settings as pro-
grams, select the program number,
and then enter the fax number of
the destination and select the scan
settings you require.
A
AA
A
Make sure that the machine is in
facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the {
{{
{Facsimile}
}}
}
key.
B
BB
B
Place the original.
C
CC
C
Press the {
{{
{Program}
}}
} key.
D
DD
D
Confirm that [Recall] is selected,
and press the registered program
No.
The standby display appears.
Then, the programmed fax num-
ber is shown. Transmission Mode
is selected.
E
EE
E
Press the {
{{
{Start}
}}
} key.
The fax number and specified time
are shown on the display, and the
machine starts to scan the original.
Transmission starts at the specified
time.
ZLFS310N
JupterC2_Fax_EN-F_FM.book Page 132 Monday, November 29, 2004 3:48 PM