Filter
Top Products
Other Transmission Features
50
4
Note
❒ If you use Immediate Transmis-
sion and the fax machine at the
destination does not support
the SUB Code function, a mes-
sage will appear on the display
to inform you of this. When this
happens, press [OK] to cancel
the transmission.
SID Code
There are times when you may want
to use an “SID” (Sender ID) when
sending confidential faxes with the
SUB Code function.
Note
❒ The ID can be up to 20 digits long.
❒ You can enter numbers, *, #, and
spaces to program an ID.
❒ You can store IDs in destination
lists and Programs. See p.129
“Registering and Changing Key-
stroke Programs”. See “Fax Desti-
nation”, General Settings Guide.
❒ Messages you send using this
function are marked “SID” on all
reports.
SEP Code
Normally you can only use Polling
Reception to receive faxes from ma-
chines that have the Polling Reception
function and the same manufacturer.
However, if a machine of another
manufacturer supports Polling Re-
ception, you can receive fax messages
from the other party using this meth-
od instead.
You can receive messages that have
the same SEP Code as the SEP Code
you entered.
Limitation
❒ A SEP Code cannot be used with
Internet Fax.
Note
❒ The ID can be up to 20 digits long.
❒ Make sure the number of digits in
the ID matches the one set on the
machine to which you are sending.
❒ You can enter numbers, *, #, and
spaces to program an ID.
❒ You can store IDs in destination
lists and Programs. See “Fax Desti-
nation”, General Settings Guide. See
p.129 “Registering and Changing
Keystroke Programs”.
❒ Messages you receive using this
function are marked “SEP” on all
reports.
❒ This function is not available with
Internet Fax.
A
AA
A
Enter the fax number of a destina-
tion or an IP-Fax destination.
B
BB
B
Press [Adv. Features].
C
CC
C
Press [SEP Code].
D
DD
D
Press [RX SEP Code].
FaxAdEN_Chapter-4 Page 50 Wednesday, January 19, 2005 2:33 PM