Filter
Top Products
Using Administrator Settings
179
9
Note
❒ If you select [Auto Detect], the
machine recognizes the pa-
per size automatically.
• The machine will detect
the paper size for the by-
pass tray as the short edge
of the paper is inserted
into the machine. Even if
you placed an A4 size
sheet in theK orientation,
the machine will detect it
as A3L.
❒ If you select [Standard Size],
select a paper size displayed,
and then proceed to step G.
❒ If you select [Custom Size],
proceed to step D.
C Select the size you want to pro-
gram from the sizes shown.
D Make sure that [Vertical] is se-
lected.
E Enter the vertical size of the pa-
per using the number keys,
and then press [#
##
#].
Note
❒ You can specify a vertical
size from 210mm (8.3 inch) to
305mm (12.0 inch). You can-
not enter a size smaller than
210mm or larger than
305mm.
❒ Each time you press [mm] or
[inch], the units switch be-
tween “mm” and “inch”. If
you enter a length and
change the units by pressing
[mm] or [inch], it is converted
automatically (fractions are
rounded off).
F Enter the horizontal size of the
paper using the number keys,
and then press [#
##
#].
Note
❒ You can specify a horizontal
size from 148mm (5.9 inch) to
600mm (23.7 inch). You can-
not enter a size smaller than
148mm or larger than
600mm.
❒ Each time you press [mm] or
[inch], the units switch be-
tween “mm” and “inch”. If
you enter a length and
change the units by pressing
[mm] or [inch], it is converted
automatically (fractions are
rounded off).
G Press [OK].
G
GG
G
Press [Exit].
H
HH
H
Press the {
{{
{User Tools/Counter}
}}
} key.
The standby display appears.
JupterC2_Fax_EN-F_FM.book Page 179 Monday, November 29, 2004 3:48 PM