Filter
Top Products
Maintenance
107
6
• Hold the folded paper to the light. The alignment difference between the
printed cross joint and the vertical line is the adjustment value. If the ver-
tical line is misaligned in the + direction by 1 calibration marking, the ad-
justment value of [Sub Scan] is [+1.0].
• Fold the paper widthwise in the same manner, and then check the adjust-
ment value of [Main Scan].
• The adjustment values of [Main Scan] and [Sub Scan] are in increments of
[0.1].
H Press [Adjust].
I Select an item you want to adjust, and then press the {OK} key.
J Enter the adjustment value with [n] [o], and then press the {OK} key.
The display returns to that of Step
I
.
AML005S