Filter
Top Products
When a Message Appears
29
3
Note
❒ If the “Check whether there are any network problems.” message ap-
pears, the machine is not correctly connected to the network or the settings of
the machine are not correct. If you do not need to connect to a network, you
can specify the setting so this message is not displayed, and then the {Facsim-
ile} key no longer lights. See “Parameter Settings”, General Settings Guide. If
you reconnect the machine to the network, be sure to set “Display” with User
Parameters.
❒ If the paper tray runs out of paper, “
Out of paper. Load it, then press
[Exit].
” appears on the display, asking you to add more paper. If there is
paper left in the other trays, you can receive documents as usual, even if the
message appears on the display. You can turn this function on or off with “Pa-
rameter Settings”. See “Parameter Setting”, General Settings Guide.
Check whether
there are any
network prob-
lems.
{15-12}
Cannot log on to the
POP3/IMAP4 server.
• Check that the user name and
password of the E-mail Ac-
count are correctly pro-
grammed from File Transfer
under System Settings. See
“File Transfer Settings”, Gen-
eral Settings Guide. You can
also use the Web Image Mon-
itor for confirmation. See the
Web Image Monitor's Help.
• Check that the user name and
password for POP before
SMTP authentication are cor-
rectly programmed from File
Transfer under System Set-
tings. See “File Transfer Set-
tings”,General Settings
Guide. You can also use the
Web Image Monitor for con-
firmation. See the Web Image
Monitor's Help.
• Contact the administrator.
Message Cause Solution