Filter
Top Products
Adding Paper and Replacing Print Cartridges
110
6
• If the horizontal lines on the both sides of the faintest square are mis-
aligned, determine an adjustment value based on a pattern that is above or
below, whose horizontals are misaligned in the opposite direction. For ex-
ample, “+2” square is faintest and the horizontals on both sides of “+6” are
in the opposite direction to “+2”, so the adjustment value is between [+3]
and [+5] depending on the degree of misalignment. After completing the
adjustment, adjust the paper feed again to check if the optimal adjustment
value is set.
G Press [Adjust].
H Enter the adjustment value with [n] [o], and then press the {OK} key.
I Press [End].
After a few seconds, the settings screen appears.
-14
-6
-2
0
+2
+6
0
+2
+6
+14
AML007S