Filter
Top Products
Printed Reports
27
3
Printed Reports
You can have reports printed from
your machine automatically, or print
them out yourself.
File Reserve Report (Switch
03, Bit 2)
If you switch this report on, it is print-
ed immediately after you store a doc-
ument in memory for Memory
Transmission. It gives the file num-
ber, the time that it was stored, and
the destinations (including any
Group numbers that were selected).
Communication Result Report
(Memory Transmission)
(Switch 03, Bit 0)
This report is printed out after memo-
ry transmission showing whether it
was successful or not. If you have
switched this report off, a Communi-
cation Failure Report will be printed
only when a communication fails.
Communication Failure Report
(On if Communication Result
Report is Off)
This report is printed if a memory
transmission failure occurred, after a
job is completed. It is only printed if
the Communication Result Report is
switched off, and in the event of a
communication failure.
Journal (Switch 03, Bit 7)
This report gives details on each com-
munication made by your terminal. It
is automatically printed out after 50
transmissions and receptions.
Transmission Result Report
(Switch 03, Bit 5)
This report is printed out after imme-
diate transmission showing whether
it was successful or not.
❖
Printing Part of the Image on the Re-
port (Switch 04, Bit 7)
For reference purposes, the ma-
chine prints the first few inches of
the fax message on the following
reports.
• Communication Result
•File Reserve
• Communication Failure Report