Filter
Top Products
Installation
106
10
Machine Environment
When choosing a location for your
machine, please follow the safety in-
struction given on the first section.
Location
For the best possible performance, in-
stall your machine in a place which
satisfies the following conditions.
• Not exposed to direct sunlight
• Well ventilated (air turnover at
least three times per hour); to
avoid the build-up of ozone, make
sure to locate the machine in a
large well-ventilated room which
has an air turnover of more than 30
yd
3
/hr per person.
• Level
• Not subject to vibration
• Away from other electronic equip-
ment, to avoid interference
• Away from areas containing corro-
sive gas
• Dust-free
• Condensation-free
• Temperature 59 to 77°F
• Humidity 30 to 70 % RH (do not in-
stall near a humidifier)
• Away from heaters and air condi-
tioners, to avoid sudden changes
of temperature
• Within 5 yards of a three-pin
grounded power outlet (115 Volts,
60 Hz)
• With the clearance as shown
This machine generates a certain
amount of ozone. Although the
amount generated is within safety re-
quirements, it is recommended that,
to avoid ozone buildup, you install
the machine in a room which is prop-
erly ventilated.
TSTH080N
TSTH080N.eps