Filter
Top Products
Key Operator Settings
58
7
User Parameters
Adjusting your machine sometimes requires that you change special settings
called user parameters. For each user parameter, you must change a bit in a
switch.
A switch has eight bits. Each bit has a value of 1 or 0, and each bit is numbered
0 to 7 from the right.
❖
Bit Values and Bit Numbers
In the following example we will change bit 3 of switch 05 in the user parame-
ters.
A
Press {
Function
} {
6
} and enter the access code {
2
} {
2
} {
2
} {
2
}. Press {
6
} {
3
},
and then the {
Yes
} key.
The following display appears.
SETTING? Y/h
PRINT LIST h
Note
❒
You can press the W key to see a list. Otherwise, press the {
Yes
} key.
B
Press the {
Yes
} key again and use W and V to change switches.
Note
❒
For example, go to switch 05 by pressing V five times.
KPAD/Y/hi
SWITCH 05 :1000 0001
C
To change bit 3, press {
3
} on the ten key pad.
Bit 3 will change from 1 to 0 or from 0 to 1.
KPAD/Y/hi
SWITCH 05 :1000 1001
Note
❒
To change bit 0, press {
0
}. To change bit 1, press {
1
} and so on.
D
Press the {
Yes
} key, and then the {
Function
} key.
Bit Number 76 543210
Bit Value ↓↓↓ ↓↓↓↓↓
010 00000