Filter
Top Products
Key Operator Settings
54
7
Switching Local Printing On / Off
You can choose whether your ma-
chine prints copies of messages that it
forwards (by default, these messages
are printed). To change this setting,
adjust bit 6 of switch 11 with the User
Parameters:
• Bit 6=0 : Do not print
• Bit 6=1 : Print
(See P.58 “User Parameters” ).
Enabling and Disabling the Forwarding
Mark
The forwarding mark is printed at the
receiving end on the top of each page
of the fax messages that are forward-
ed from your machine. This mark will
help the operator at the other end to
recognize messages that have been
forwarded. If you wish, you can
switch this mark off.
To switch the Forwarding Mark on or
off, adjust bit 0 of switch 02 with the
User Parameters:
• Bit 1=0 : Forwarding mark off
• Bit 1=1 : Forwarding mark on
(See P.58 “User Parameters”).
Cassette Selection
About Cassette Selection
This feature is only available if your
machine has an optional second pa-
per cassette, you can direct fax mes-
sages from certain senders to be
printed from the main cassette.
Note
❒ Example: Put yellow paper in the
main cassette. Then, messages
from the head office can be printed
out on yellow paper; this will
make it easy for you to see when a
message from head office has ar-
rived.
A You must specify a list of send-
ers (Function 81). See P.47 “Pro-
gramming a List of Senders to
Treat Differently (Function 81)”.
B You must turn Cassette Selec-
tion (Function 62). See P.45 “Se-
lecting the Cassette (Function
62)”.
C Select the messages to be print-
ed from the main cassette.
a) All messages from specified
senders.
b) All messages except those
from specified senders. (user
parameters, switch 08, bit 4 and
5; see P.58 “User Parameters”).
Entering a List of Senders to Treat
Differently (Function 81)
How to enter a list of senders to treat
differently, see P.47 “Programming a
List of Senders to Treat Differently
(Function 81)”.