Filter
Top Products
CHANGING DEFAULT SElllNGS (SERVICE PROGRAM MODE)
How To Change The Settings Of Service
Programs
1
d
CI
You can register SP No. 29, 79, 84, 87, 88, 89 or 142 in the CS Mode key .
(- See page 117.), and change their settings using the CS Mode key. (~
See page 119- 129.)
a
Procedure 1
E
.
.
El
El
n
After entering the desired SP
No., press the Enter key. The
value or mode set at the factory
will be displayed at the end of
the second line on the guidance
display.
If you designate the wrong SP No.,
press the Clear Modes key. Then,
re-enter the desired SP No.
Enter the desired value or
mode using the Number keys.
Press the Enter key to store
the desired value or mode.
If you enter the wrong value or
mode, press the Clear Modes key.
Then, go back to step 1.
115