Filter
Top Products
CHANGING DEFAULT SEITINGS (SERVICE PROGRAM MODE)
5P No. Mode
Function
In this function, the machine stops printing for
2 seconds after one set of prints are
completed in Class or Memory mode. This
gives you the chance to separate each set
when you do not have an optional tape
Auto
dispenser. For example, you can remove
88
Memory/Class
prints one by one from the paper delivery
table or insert one sheet of paper between
mode
the prints.
n Default: O
n Adjustment value:
O: Memory/Class mode
1: Auto Memory/Class mode
Reproduce tint image.
89
Tint mode setting
~ Default: O
0 Adjustment value:
O: No 1: Yes
Resettable Total
Used to display the total number of masters
113 Master/Copy
and prints.
Counter
D M: Total number of masters
P: Total number of prints
Clears the resettable total master/copy
Clear Resettable
counter.
114 Total Master/Copy ~ ~efau,t. *
Counter
o Adjustment value:
O: No 1: Yes
Selects user code mode. When you set this
function, you have to also specify the auto
reset time. For details about user code mode,
- see page 139.
120 User Code Mode o Default: User Code mode: O
Auto Reset time: O
a Adjustment value:
User Code mode:
O: No 1: Yes
Auto Reset time:
O: No 1 to 5 minute:
136
OPTIONAL FUNCTIONS
Loading paper
n Maximum paper capacity is as follows:
4,000 sheets (64 g/m2, 17 lb)
3,000 sheets (80 g/m2, 20 lb).
n
Open the LCT cover.