Filter
Top Products
CHANGING DEFAULT SEITINGS (SERVICE PROGRAM MODE)
How to check the user code counter (# 121)
n
If you want to check the total masters and prints made under all user codes,
= see
page 144.
n
El
El
n
A
Press the keys on the operation
panel in the following order:
(1)
Clear Modes key
(2) Clear key
(3) Enter key.
Enter “121” using the Number
keys
and press the Enter key.
The number of masters and
prints made under the user
code
“382” will be displayed in
the guidance display.
Continue pressing the Enter
key to display the number of
masters and prints made under
your user code.
Press the
Clear Modes key to
leave Service Program mode.
142
OPTIONAL FUNCTIONS
Bypass Feed Stapling
You can staple a stack of paper that is set on the first bin of the sorter
stapler.
o Before setting paper on
the first bin, make sure that no prints remain on any
of the bins.
c1 For stapler capacity, I= see page 84 or 85.
n
Set the stack of paper you want
to staple on the first bin.
i-l Make sure that the StaDle kev on
17ii3xl