Filter
Top Products
CHANGING DEFAULT SEITINGS (SERVICE PROGRAM MODE)
SP No.
160
-170
Mode
~
Function
Adjust the erase edges area for the following
sizes of originals. The adjustment value is (50 -
307 mm) x (50 -432 mm).
SP No. 160: A30r11’’xl7°
D Default: metric version: 289 x 416 mm
inch version: 271 x 428 mm
Erase Margins
Adjustment Area
SP No. 161:
B4 or 81@’x 14”
a Default:
metric version: 249 x 360 mm
inch version: 208 x 352 mm
SP No. 162 A4 or 81@”x 11”
a Default:
metric version: 202 x 293 mm
inch version: 208 x 275 mm
SP No. 163 A4 or 81/2” x 11”
a Default: metric version: 289 x 206 mm
inch version: 271 x 212 mm
SP No. 164 B5 or
51/2” x 81/2”
n Default: metric version: 174 x 253 mm
inch version: 132 x 212 mm
SP No. 165 B5 or
51/2” x 81@
~ Default:
metric version: 249 x 178 mm
inch version:
208 x 136 mm
SP No. 166
A5 m
o Default:
metric version: 140 x 206 mm
inch version: 50 x 50
mm
SP No.
167
metric version: A5 CI
IJ Default: 202 x 144 mm
SP No. 168 metric version: A6 D
CI Default:
97x 144 mm
SP No. 169 metric version: A6 u
D Default:
140x 101
mm
SP No. 170 smaller than A6
a Default: 92 x 144 mm
138
OPTIONAL FUNCTION!
B
Make your prints.
I
a When you want to make prints us-
ing another original, remove prints
from the bins. Then, repeat steps 3
through k$.