Filter
Top Products
CHANGING DEFAULT SETTINGS (SERVICE PROGRAM MODE)
SP No.
Mode
Function
4
121 User Code Count
Displays the number of masters and copies
made in each
user code.
Clear each user code counter.
122
Clear User Code
Count
D Default: O
a Adjustment value:
O: No 1: Yes
123
Total User Code
Displays the total number of masters and
Count
copies for all the 20 user codes
Clears the total user code counter.
124
Clear Total User
Code Count
a Default: O
CI Adjustment value:
O: No 1: Yes
The machine determines the print area size
according to the reproduction ratio and the
size of paper set on the paper feed table. If
you are making prints on non-standard paper
and the original image does not entirely
appear on the print, set paper size detection
Paper size
to off. When you set the paper size detection
142
detection selection
to off, you can also select whether the paper
size indicators are displayed or not.
D Default:
paper size detection: 1
paper size indicators: O
a Adjustment value:
paper size detection: O: No 1: Yes
paper size indicators: O: No 1: Yes
The machine determines the print area size
according to the size of the original. If you are
making prints using originals of a non-
Original Size
standard size and the image does not entirely
143
Detection
appear on the prints, set original detection not
work.
D Default: 1
a Adjustment value:
O: No 1: Yes
137
El
;.
(king the Number keys, enter
the number of the prograim that
you wish tO remove protection
--4?-- -
Press the Enter key.