Filter
Top Products
OPERATION
Press the Master Making key.
Check the image position of the
trial or proof print.
If the
image position is not correct,
adjust it using the Image Position
keys (~ See page 21) or the side
plate fine adjusting dial (~ See
page 22).
Make your prints.
After the last page of each printing
set is fed out to the paper delivery
table, the tape dispenser drops a
strip of paper on the top of the pa-
per stack.
If the power switch of the optional
tape dispenser is turned off or the
tape dispenser is not installed in
your machine, the group printing
cycle stops after each set is deliv-
ered. Remove the set of prints
from the paper delivery table and
press the Print Start key to start
the next group printing cycle.
49
Press to save ink. * See page
44.
12.
Reduce/Enlarge key
6. Speed keys
Press to adjust the printing speed.
e see pages 23 and 24.
7.
Memory/Class key
Press to select Memory or Class
mode. ~ See pages
47 and 50.
Press to reduce or enlarge the
image. ~ See page 26.
13. Directional Magnification
key
Press to specify a different
reproduction ratio for each
direction. * See page 31.
8. Skip Feed key
Press to select skip feed printing.
14.Make Up key
[- See
page 59.
Press to use the optional Make-up
function. * See section 2.