Filter
Top Products
TROUBLESHOOTING
TURNSORTERON
COMMUNICATION ERROR
I* The power cord Of the Scwter stapler may not be plugged in.
Plug it in firmly.
1- Connection between the machine and the sorter stapler is
wrong. Contact your service representative.
PAPER LE17 ON SORTER
REMOVE PAPER
I* Paper remains On the bins. Remove paper from the bins.
STAPLE NOT AVAILABLE
DIFFERENT PAPER SIZE
H
II* You cannot staple different sized paper when you use Auto
Staple or Manual Staple mode. Make prints on the same
sized paper or staple prints using Bypass Feed Staple
function.
STAPLE NOT AVAILABLE
OVER-LOADED/FLOWING
m Sheets of paper Over the maximum staple capacity of bins
(- see
page 84 or 85) have been delivered to the bins.
Reduce the number of prints. If you still want to staple
prints, use the Bypass Feed Stapling.
STAPLE NOT AVAILABLE
CHECK PAPER SIZE
I* When use paper Other than the designated paper size, you
cannot use Auto
Staple or Manual Staple mode. Use the
proper paper size described on page 84 or 85.
164
I
n
Repeat steps 3 and 4 until you
have finished loading paper.
B
Close the slide cover and LCT
I
cover.
m