Filter
Top Products
o When you use originals with light lettering, edges of the letters may be
printed clearly and the inside of the letters may be light. In this case, in-
crease the image density.
a When you use originals of fine letters,
letters on prints may be skipped. In
this case, increase the image density or use Line mode.
D Up to 1,000 sheets of paper can be delivered to the paper delivery table.
However, if 500 or more sheets of paper are delivered to the paper delivery
table, the leading edge of the prints might become stained.
Print Paper
n When you use non-standard paper, some parts of the image might not ap-
pear on the print. In this case, set the machine not to detect paper size using
the Service Programs. = See page 137.
a When the paper is curled, stack the paper with the curl face down, othemuise
the paper might wrap around the drum or stains may appear.
D Postcards and the like do not absorb ink well. Offset images might appear
on the rear side of subsequent prints. Solid image originals will cause offset
image prints.
Originals
IJ If there is no margin or if there is a solid image area near the leading edge
of the original, make at least a 5 mm, 0.2”, margin at the leading edge;
otherwise, the paper might wrap around the drum or the paper exit pawl
might become dirty and cause black lines on prints.
n If you use originals that have bold letters or solid images at the leading
edges, you might get prints with dirty edges. In this case, insert the widest
margin first, or raise the printing speed.
a If you use paste-up originals, make sure that the pasted parts hold firmly to
the base sheet. If the thickness of the paste-up originals is more than 0.2
mm, 2/250” and the space between the pasted parts is less than 2 mm,
2/25”, a shadow might appear on the print.
207