Filter
Top Products
REPLENISHING SUPPLIES
c!
A
El
El
The new master roll must be
positioned as shown in the illus-
tration.
Insert the paper edge of the
master roll under the arrow
mark (1) until you can see the
leading edge under the trans-
parent cover.
Return the pressure release
lever to its original position (2).
(2)
Rotate the spools backward to take
1
/ (1)
up any slack in the master.
Press the master cut button to
cut the leading edge of the
~
master roll.
ACaution: When the master cut but-
ton is pressed, the mas-
ter roll will rotate. Do not
touch the
master roll.
n
*
b
o
After the beeper sounds, open
the transparent cover and re-
move the cut-off portion of the
master roil.
Remove the cut-off master com-
pletely to prevent master misfeed.
152
OPTIONAL FUNCTIONS
Printing Using The Optional Large Capacity
Tray (lCT)
Guide to large capacity tray components
D
To install the large capacity tray, the LCT cabinet is required.