Samsung CLX-6260FW All in One Printer User Manual


 
Wireless network setup
212
2. Using a Network-Connected Machine
When you have found the printer you want to connect to from your
mobile device, select the printer and the printer's LED will blink. Press the
WPS button on the printer and it will be connected to your mobile
device.
If your mobile device does not support Wi-Fi Direct, you need to enter
the "Network Key" of a printer instead of pushing the WPS button.
21
Troubleshooting for wireless network
Problems during setup or driver installation
Printers Not Found
Your machine may not be turned on. Turn on your computer and the
machine.
USB cable is not connected between your computer and machine. Connect
the machine to your computer using the USB cable.
The machine does not support wireless networking. Check the machine's
user's guide included on the software CD supplied with your machine and
prepare a wireless network machine.
Connecting Failure - SSID Not Found
The machine is unable to find the network name (SSID) you have selected or
entered. Check the network name (SSID) on your access point and try
connecting again.
Your access point is not turned on. Turn on your access point.
Connecting Failure - Invalid Security
Security is not configured correctly. Check the configured security on your
access point and machine.
Connecting Failure - General Connection Error
Your computer is not receiving a signal from your machine. Check the USB
cable and your machine’s power.
Connecting Failure - Connected Wired Network
Your machine is connected with a wired network cable. Remove the wired
network cable from your machine.
Connecting Failure - Assigning the IP address
Cycle the power for the access point (or wireless router) and machine.
PC Connection Error
The configured network address is unable to connect between your
computer and machine.