Filter
Top Products
Basic copying
74
2. Menu Overview and Basic Setup
The machine prints one side of the original on the upper half of the paper and
the other side on the lower half without reducing the size of the original. This
feature is helpful for copying a small-sized item such as business card.
• The original must be placed on the scanner glass to use this feature.
• If the machine set to Eco mode, this feature is not available.
Depending on the model, the operating procedure may differ.
1
Press ID Copy on the control panel.
Or select (Menu) > Copy Feature > Layout > ID Copy on the control
panel.
Or select Copy > ID Copy on the touch screen.
2
Place the front side of an original facing down on the scanner glass
where arrows indicate as shown. Then, close the scanner lid.
3
Place Front Side and Press [Start] appears on the display.
4
Press (Start).
Your machine begins scanning the front side and shows Place Back Side
and Press [Start].
5
Turn the original over and place it on the scanner glass where arrows
indicate as shown. Then, close the scanner lid.
6
Press (Start) button.