Filter
Top Products
System setup
250
3. Useful Setting Menus
17
Network setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 33).
You can also use this feature from the SyncThru™ Web Service. Open the
Web browser from your networked computer and type the IP address of
your machine. When SyncThru™ Web Service opens, click Settings >
Network Settings (see "Using SyncThru™ Web Service" on page 310).
• Press (Menu)> System Setup> Network on the control panel,
• Or press Setup > Machine Setup > Next > Network Setup on the touch
screen.
Option Description
TCP/IP (IPv4)
Selects the appropriate protocol and configure
parameters to use the network environment (see
"Setting IP address" on page 178).
There are lots of parameters to be set. If you are
not sure, leave as is, or consult the network
administrator.
TCP/IP (IPv6)
Selects this option to use the network environment
through IPv6 (see "IPv6 configuration" on page 189).
Ethernet Speed
Configure the network transmission speed.
Turn the power off and on after you change this
option.
802.1x
You can selects the user authentication for network
communication. For detailed information consult the
network administrator.
Wireless Selects this option to use the wireless network.