Filter
Top Products
5-56
Chapter 5
CLI (Command Line Interface)
4. Set the values for the selected item referring to the following table, and press
[Enter].
Item Description
Access Code
Inputs the Prefix Digit that can identify the other party to be
connected. The maximum
length of Prefix Digit is 8 .
Acc Code Length Sets the length of access code. (0~8)
Acc Code
Del-Len
Inputs the number of digit to be deleted from the access code.
It analyzes the access code and deletes to the set length
before it sends the remainder digits to the other party. (0~8)
Insert Digit
After it analyzes and deletes digits from access codes, it sets
prefix to be added to the access codes. It normally uses the
other party’s Trunk access code. The maximum length of
Insert Digit is 8.
IP Table Index1
IP Table Index2
Sets IP table numbers that store IP address data of the other
party’s VoIP device. Each IP table can have up to 32 IP
addresses, and can set 2 IP tables per access code.
IP Table Start
Point
When multiple IP addresses exist in the specified IP table, it
sets which IP address is to be connected first. It is used to
diversify routing when one access code is used for
connecting multiple VoIP Gateways.
GK Use
Decides whether to use Gatekeeper for the corresponding
access.
5. Now type ‘1’ in VoIP Routing Table to set the Prefix.
VoIP Routing Table (0: Outbound Routing Table, 1:Inbound
Routing Table)->1