Filter
Top Products
3-2
Chapter 3
Installing the System
Condition of the Installation Location
SMG-3200 system can be installed in a rack or on a table. To operate the SMG-3200 system
securely, you have to find the location that satisfies the conditions described in this chapter before
setting up the system.
Please do not place the unit on a table with a table cloth, and do not cover
the ventilation slots.
Space Condition
You have to select the location that satisfies the following conditions such as safety condition and
temperature/humidity condition.
y
Installation is to be performed by qualified service personnel only.
y
To be installed in Restricted Access Areas.
Safety Condition
y
Remove the objects that are sensitive to fires such as explosive gas and flammable objects in the
exchange room.
y
Before setting up the system, check that every condition is satisfied such as the power wiring,
grounding, voltage, frequency, and etc.
y
If the power switch or circuit breaker is open, be sure to remove the power supply line’s
blocking route.
y
If the PSTN is connected with the system, set up the protection element in the MDF.
y
If subscriber cable goes outside, set up the protection element in the MDF.
y
Place a booklet that provides emergency measures, grate, artificial respiration and heart
resuscitation information in the exchange room to prepare for emergency cases such as electric
shock.