Filter
Top Products
5-23
[4] SLC Signal
Function You can set the signal type of the SLC interface.
Procedure 1. In the <PSTN Configuration Menu> screen, type ‘4’, and press [Enter].
2. Input the number of the SLC signal to be changed, and press [Enter].
Configuration Item Number:
3. Specify a value referring to the following table, and press [Enter].
No
NoNo
No Item
ItemItem
Item Description
DescriptionDescription
Description
0 Hook Off Time
The minimum time elapsed to recognize hook off of
an analog telephone. Typed number x 100msec is
the actual hook off time.
1 Hook On Time
The minimum time elapsed to recognize hook on of
an analog telephone. Typed number x 10msec is the
actual hook on time.
2
Hook Flash MIN.
Time
The minimum time elapsed to recognize hook flash
of an analog telephone. Typed number x 10msec is
the actual hook flash time.
3
Hook Flash MAX.
Time
The maximum time elapsed to recognize hook flash
of an analog telephone. Typed number x 10msec is
the actual hook flash time.