Filter
Top Products
5-15
The following is an overview of the 17 submenus found in the PSTN Configuration Menu.
No
NoNo
No Menu
MenuMenu
Menu Functions
FunctionsFunctions
Functions
0 Gateway Operation Mode
Sets the system operation mode.
1 PSTN Rerouting Insert Digit
When PSTN routing, it configures a trunk line access
code used in either PBX or KTS.
2 PCM Method
Sets PCM mode.
3 Dial Method
Sets the trunk line digit transmission method.
4SLC Signal
Sets the signal type of analog interface.
5 Trunk Signal
Sets the signal type of digital interface.
6 Call Control Method
Sets the signal type for call control.
7 Ring Cadence
Sets the system ring cadence.
8 System Tone Cadence
Sets the system tone cadence.
9 CO Tone Cadence
Sets the CO tone cadence.
10 Gain Control
Adjusts call quality depending on the connection type.
11 Diagnosis
Sets the diagnosis interval for PSTN interface.
12 MMC Port Block/UnBlock
Specifies use of a specific port.
13 Display Slot Configuration
Views configuration of cards installed in system slots.
14 Display Port Status
Views system slots and operation status of ports.
15 Save & Exit
Closes the PSTN Configuration Menu screen with saving
changes.
16 Exit
Closes the PSTN Configuration Menu screen without
saving changes.