Filter
Top Products
5-67
cdrhelp
Function This command prints the list of short descriptions of the CLI commands that the
user uses to operate the system to display the CDR information. For detailed
description of the CDR format, please see "Chapter 7 Using the CDR (Call Detail
Record)."
Procedure At the SMG-3200 prompt, type 'cdrhelp,' and press [Enter]. Then, the following
CLI command list related to CDR information is displayed on the screen.
SMG3200:165.213.81.230> cdrhelp
cdrhelp
cdrlist
CDRclear
CDRsetlist
CDRtcpport port
CDRudpport ip1,ip2,ip3,ip4,port
Set CDR Output on UDP IP & Port
Offcdrtcp
Offcdrudp
Oncdrtcp
Oncdrudp
value = 1 = 0x1
SMG3200:165.213.81.230>
Print This List
Print CDR for the Current Call
Set Default CDR Port, Clear CDR Buffer
Print CDR Setting Information
Set CDR Output on TCP Port(Default Port:8200)
Turn Off CDR Output on TCP Link(default)
Turn Off CDR Output on UDP Link(default)
Turn On CDR Output on TCP Link
Turn On CDR Output on UDP Link