Filter
Top Products
5-75
Oncdrtcp
OncdrtcpOncdrtcp
Oncdrtcp
Function Before using this command, the port for displaying the CDR information must be
set, and the Default value is 8200. Activate the CDR to be output to the TCP Link.
Basically, the CDR TCP link output is turned Off.
Procedure 1. If you want to display the CDR information on the TCP Link, type 'Oncdrtcp'
at the SMG-3200 prompt, and press [Enter].
SMG3200:165.213.81.230> Oncdrtcp
>>>[CDR] Turn On CDR Output on TCP Link
>>>[CDR] TCP Port(8500)
Goodvalue = 0 = 0x0
SMG3200:165.213.81.230>
2. If you use the Telnet program to connect to the CDR tcp port specified for the
system, the CDR information is displayed. For more details on the format of
the CDR information, please see "Chapter7 Using the CDR (Call Detail
Record)."
GVO: 1/2/2002 18:39:07 --:--:-- 201 2111 165.213.87.74
20 0026 24
DVR: 1/2/2002 18:39:08 --:--:-- - 9 - 43 0202 0
DVR: 1/2/2002 18:39:11 --:--:-- - 9 - 42 0202 0
DVR: 1/2/2002 18:39:14 --:--:-- - 9 - 41 0202 0
DVI: 1/7/2002 14:59:13 --:--:-- 201 4111 - ffff 001c 0
DVO: 1/7/2002 14:59:12 --:--:-- 201 4111 165.213.81.230
20 001c 0
DVI: 1/7/2002 15:00:25 15:00:25 4112 201 165.213.87.83 20
0010 64
DVI: 1/7/2002 11:27:32 --:--:-- 4111 201 - 20 0010 0
DVI: 1/7/2002 11:27:34 --:--:-- 4111 201 - 20 0010 0