Filter
Top Products
5-12
Chapter 5
CLI (Command Line Interface)
[5] Default DB Setting
Function You can set all values of each variable in the SMG-3200 to default values, by
database type.
Procedure 1. In the <System Configuration Menu> screen, type ‘5’, and press [Enter].
2. When the following message appears, select which database variables are to be
changed to default values and press [Enter]. To change all database variable
values with default values, select ‘0’.
Set Default DB (0: All, 1: System, 2: PSTN, 3: VoIP )
3. It will automatically find and set the old values to the default values. The
screen below the case you selected ALL.
>>> Set Default System DB(Default Login ID):
Good
>>> Set Default System DB(Default Password):
Good
>>> Set Default System DB(DHCP Client Off ):
Good
>>> Set Default PSTN DB(PSTN Configuration):
Good
>>> Set Default VoIP DB(VoIP Configuration):
Good
4. Upon completion, a message asking whether to restart the system will be
displayed as follows. To restart immediately, type ‘y’ or type ‘n’ otherwise and
press [Enter].
# System Configuration has changed. Restart? (y: Now, n: Later) ->