Filter
Top Products
7-5
How to receive call information - UDP Link
1. Check the current setting status.
: The current UDP Link is inactive, and the UDP Port information and UDP IP Address are not set.
SMG3200:165.213.81.230> CDRsetlist
>>>[CDR] Turn Off CDR Output on TCP Link
>>>[CDR] TCP Port: 8200
>>>[CDR] Turn Off CDR Output on UDP Link
>>>[CDR] UDP Port: Unknown
>>>[CDR] UDP IP Address = Unknown
value = 37 = 0x25 = '%'
SMG3200:165.213.81.230>
2. Set the UDP IP Address and Port.
: The IP Address and port for UDP Link connection are set.
SMG3200:165.213.81.230> CDRudpport 165,213,87,154,50000
<- There are dots (.) between Numbers.
>>>[CDR] Set CDR Output on UDP IP = 165.213.87.154
>>>[CDR] Set CDR Output on UDP Port(50000)
Goodvalue = 0 = 0x0
SMG3200:165.213.81.230> CDRsetlist
>>>[CDR] Turn Off CDR Output on TCP Link
>>>[CDR] TCP Port: 8200
>>>[CDR] Turn Off CDR Output on UDP Link
>>>[CDR] UDP IP Address = 165.213.87.154 <- IP Address and
>>>[CDR] UDP Port: 50000 Port number are set up.
value = 26 = 0x1a
SMG3200:165.213.81.230>