Filter
Top Products
5-98
Chapter 5
CLI (Command Line Interface)
Onbcast slot,port,tel
Onbcast slot,port,telOnbcast slot,port,tel
Onbcast slot,port,tel
Function It sets the function to connect the speaker through E&M and Loop, and broadcast.
If this function is set and a call is tried at the specified phone number, the speaker
is connected to the applicable slot and channel of the SMG-3200 system, and can
be used for broadcasting.
This CLI sets the currently active status, and if the setting needs to be maintained
during system booting, it must be saved in the CLI’s pstnmenu.
slot 1 or 2 (1:USL1, 2:USL2)
Channel the port number of the applicable slot (1~8).
Tel telephone number for connecting to the speaker.
Procedure 1. At the SMG-3200 prompt, type 'Onbcast' and type the desired slot, channel,
and telephone number in parentheses, and press [Enter]. The parameter must be
in parentheses and separated by commas (,).
For example, if you want to set 700 as the telephone number for USL slot 1, and
port 1, and connects the speaker, type 'Onbcast(1,1,700)' on the screen, and press
[Enter].
SMG3200:165.213.81.230> Onbcast(1,1,700)
On broadcast function : slot 1, channel 0, tel 700...
value = 56 = 0x38 = '8'
SMG3200:165.213.81.230>