Filter
Top Products
5-6
Chapter 5
CLI (Command Line Interface)
[1] Network Configuration
Function Users can set the network configuration such as IP address for the SMG-3200,
default gateway address and subnet mask. After setup, you must restart the system
to implement the change.
Procedure 1. In the <System Configuration Menu> screen, type ‘1’, and press [Enter].
2. To change the network information, type ‘y’, and press [Enter].
Change Network Configuration? (y: Yes, n: No) ->
3. Input a new IP address for the SMG-3200 and press [Enter].
IP Address (dot form): 165.213.81.230 ->
4. Input an IP address for the default gateway and press [Enter].
Gateway Address (dot form): 165.213.81.1 ->
5. Input a subnet mask and press [Enter].
Netmask(dot form): 255.255.255.0 ->