Filter
Top Products
5-100
Chapter 5
CLI (Command Line Interface)
Offloopcheck
OffloopcheckOffloopcheck
Offloopcheck
Function This command is used to clear the Onloopcheck function(default).
This CLI sets the currently active status, and if the setting needs to be maintained
during system booting, it must be saved in the CLI’s pstnmenu.
Procedure 1. At the SMG-3200 prompt, type 'Offloopcheck,' and press [Enter].
SMG3200:165.213.81.230> Offloopcheck
Off Loop Disconnect Check Function...
value = 40 = 0x28 = '('
SMG3200:165.213.81.230>