Filter
Top Products
5-76
Chapter 5
CLI (Command Line Interface)
Oncdrudp
OncdrudpOncdrudp
Oncdrudp
Function It activates the CDR to be output to the UDP Link. Basically, the CDR UDP Link
output is turned Off. Before using this command, the UDP IP address and port for
displaying the CDR information on the UDP Link must be set. These values do
not have Defaults, and users must set them.
Procedure 1. If you want to display the CDR information on the UDP Link, type 'Oncdrudp'
at the SMG-3200 prompt, and press [Enter].
SMG3200:165.213.81.230> Oncdrudp
>>>[CDR] Turn On CDR Output on UDP Link
>>>[CDR] UDP IP Address = 165.213.87.85
>>>[CDR] UDP Port: 8800
Goodvalue = 0 = 0x0
SMG3200:165.213.81.230>
2. If you make the UDP Link to the UDP Server program using the port of the
CDR UDP IP address specified for the system, the CDR information is
displayed. For more details on the CDR information, please see "Chapter7
Using the CDR (Call Detail Record)."
opened UDP socket with port no. 8800 ...
-----------------------------------------
GVO: 1/2/2002 18:39:07 --:--:-- 201 2111 165.213.87.74 20
0026 24
DVR: 1/2/2002 18:39:08 --:--:-- - 9 - 43 0202 0
DVR: 1/2/2002 18:39:11 --:--:-- - 9 - 42 0202 0
DVR: 1/2/2002 18:39:14 --:--:-- - 9 - 41 0202 0
DVI: 1/7/2002 14:59:13 --:--:-- 201 4111 - ffff 001c 0
DVO: 1/7/2002 14:59:12 --:--:-- 201 4111 165.213.81.230
20 001c 0
DVI: 1/7/2002 15:00:25 15:00:25 4112 201 165.213.87.83 20
0010 64
DVI: 1/7/2002 11:27:32 --:--:-- 4111 201 - 20 0010 0
DVI: 1/7/2002 11:27:34 --:--:-- 4111 201 - 20 0010 0