Filter
Top Products
5-94
Chapter 5
CLI (Command Line Interface)
Onhotconnection
OnhotconnectionOnhotconnection
Onhotconnection
Function If a Hook Off Event is detected in the FXS/FXO configuration, it automatically
enables a VoIP call. The routing information about access code '9' must be set
from the VoIP Outbound Routing Table. This function can be used when a 1:1
connection is made to the other’s Gateway, and the VoIP Network is used to do
Overlap Dialing. (In case VoIP is used for T/D)
This CLI sets the currently active status, and if the setting needs to be maintained
during system booting, it must be saved in the CLI’s pstnmenu.
Procedure 1. At the SMG-3200 prompt, type 'Onhotconnection,' and press [Enter].
SMG3200:165.213.81.230> Onhotconnection
On hot connection...
value = 23 = 0x17
SMG3200:165.213.81.230>